Alkaline Water Machine Sediment Replacement Filter
The sediment filter SE-01 removes suspended matter such as sand, silt, loose scale, clay, or organic materials from the water source. Sediment filters are needed, not because sediment is particularly dangerous or unhealthy, but because sediment can damage the Hydro-Chi (Alkaline Water Machine) by adding unneeded debris and organic waste by-products that need to be removed.
The Hydro-Chi SE-01 needs to be replaced every 12 months or 12,000 liters as indicated on the Hydro-Chi display located on the machine, or sooner depending on your water quality.
You will need the filter replacement wrench that came with the purchase of the Hydro-Chi. Release the cartridge housing, remove the old filter and discard. Place the new filter into the cartridge housing and tighten as needed. Check for leaks. Retighten as needed until there are no leaks.
Note:
Allow the water to flush through the Hydro-Chi for 10 minutes before drinking any of the dispensed water.
Dimensions:
Height: 9.50"
Dimension: 2.25" |